We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.
These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.
Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters.
Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance.
These type of meters requires very low maintenance.
- Meter Sizes: DN 10 up to DN 2000
- End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type.
- Outer Body Materials : MS or, SS
- Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene
- Electrode Material : Hastelloy C or, B, Titanium
- Velocity suitability: 0.5 up to 10 M/Sec
Note : To receive quick response, please provide your basic requirement details and max.Application information.